View HWI453232-100_4497933.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MOLDED WIREWOUND CHIP INDUCTORS
1. PART NO. EXPRESSION :
HWI453232 SERIES
HW I 4 5 3 2 3 2 - 1 R 0 K F
(a) (b) (c) (d)(e)
(a) Series code (b) Dimension code (c) Inductance code : 1R0 = 1.00uH
(d) Tolerance code : K = 10%, M = 20% (e) F : Lead Free
2. CONFIGURATION & DIMENSIONS :
A'
1R0
A I G I
C
F
F
E B
PCB Pattern Unit:m/m
A' 4.50.3
A 4.20.2
B 3.20.2
C 3.20.2
E 1.20.2
F 1.00.2
G 2.2 Ref.
H 1.6 Ref.
H
I 1.5 Ref.
3. SCHEMATIC :
4. MATERIALS : d (a) Core : DR Ferrite Core (b) Wire : Enamelled Copper Wire a (c) Terminal : Tinned Copper Plate (d) Capsulate : Epoxy Novolac Molding Compound c
b
NOTE : Specifications subject to change without notice. Please check our website for latest information.
26.02.2009
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 1
MOLDED WIREWOUND CHIP INDUCTORS
5. GENERAL SPECIFICATION : a) Temp. rise : 20C Max. b) Ambient temp. : 100C Max. c) Storage temp. : -40C to +125C d) Operating temp. : -40C to +125C e) Terminal strength : 0.5Kg Min. f) Rated current : Current cause inductance drop within 10% g) Resistance to solder heat : 260C for 10secs h) Resistance to solvent : Per MIL-STD-202F
HWI453232 SERIES
6. CHARACTERISTICS CURVES : Peak Temp : 250C Max. Max time above 230C : 40sec Max. Max time above 200C : 70sec Max.
Temperature Rising Area 2~4C/sec 250 200 150 100 50 0 50 100 150 Time (seconds) 200 250 Preheat Area 150~180C / 90~150 sec Reflow Area 2~4C/sec Cooling Area 3~5C/sec
Temperature (C)
2505C 10sec (45~70sec)
NOTE : Specifications subject to change without notice. Please check our website for latest information.
26.02.2009
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 2
MOLDED WIREWOUND CHIP INDUCTORS
7. ELECTRICAL CHARACTERISTICS : Part No. HWI453232-1R0 F HWI453232-1R2 F HWI453232-1R5 F HWI453232-1R8 F HWI453232-2R2 F HWI453232-2R7 F HWI453232-3R3 F HWI453232-3R9 F HWI453232-4R7 F HWI453232-5R6 F HWI453232-6R8 F HWI453232-8R2 F HWI453232-100 F HWI453232-120 F HWI453232-150 F HWI453232-180 F HWI453232-220 F HWI453232-270 F HWI453232-330 F HWI453232-390 F HWI453232-470 F HWI453232-560 F HWI453232-680 F HWI453232-820 F HWI453232-101 F HWI453232-121 F HWI453232-151 F HWI453232-181 F HWI453232-221 F HWI453232-271 F HWI453232-331 F HWI453232-391 F HWI453232-471 F HWI453232-561 F HWI453232-681 F Inductance tolerance : : K : 10% M : 20% Inductance ( H ) 1.00 1.20 1.50 1.80 2.20 2.70 3.30 3.90 4.70 5.60 6.80 8.20 10.00 12.00 15.00 18.00 22.00 27.00 33.00 39.00 47.00 56.00 68.00 82.00 100.00 120.00 150.00 180.00 220.00 270.00 330.00 390.00 470.00 560.00 680.00 Q Min. 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 20 20 20 20 20 20 20 30 30 30 30 Test Frequency ( MHz ) 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 7.96 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 2.52 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 0.796 SRF ( MHz ) Min. 180 160 130 100 80 60 45 40 35 30 28 25 22 21 20 19 18 16 14 12 11.5 11 10 9 8 7.5 7.0 6.5 5.5 5.0 4.0 3.0 3.0 3.0 2.5
HWI453232 SERIES
RDC () Max. 0.11 0.12 0.15 0.16 0.18 0.20 0.22 0.24 0.27 0.30 0.35 0.40 0.50 0.60 0.70 0.80 0.90 1.20 1.40 1.60 1.90 2.20 2.60 3.50 4.00 4.50 6.50 7.50 9.00 11.0 13.0 13.5 15.0 17.0 22.8 IDC ( mA ) Max. 1050 1000 950 900 850 800 750 700 650 650 600 600 550 500 450 400 370 330 300 280 260 240 220 200 180 160 140 120 120 100 90 85 75 70 65
NOTE : Specifications subject to change without notice. Please check our website for latest information.
26.02.2009
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 3
MOLDED WIREWOUND CHIP INDUCTORS
8. PACKAGING INFORMATION : ( 1 ) CONFIGURATION T
HWI453232 SERIES
COVER TAPE 2.00.5 N OC OC B A
D
G
EMBOSSED CARRIER * CARRIER TAPE WIDTH : D
END
P:8 m/m
4 m/m
START
1R0
1R0
1R0
1R0
1R0
TRAILER NO COMPONENT 160mm Min.
1R0
COMPONENTS USER DIRECTION OF FEED
TRAILER NO COMPONENT 390mm Min.
( 2 ) DIMENSIONS A 178 B 210.8 C 13 D 12 G 14 +0 N 50 -0
Unit:m/m T 16.5
NOTE : Specifications subject to change without notice. Please check our website for latest information.
26.02.2009
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 4
MOLDED WIREWOUND CHIP INDUCTORS
9. RELIABILTY TEST :
HWI453232 SERIES
TEST ITEM
SPECIFICATION
TEST CONDITION / TEST METHOD
ELECTRICAL PERFORMANCE TEST INDUCTANCE L Q SELF RESONANCE FREQUENCY SRF DC RESISTANCE RDC HP4194A, HPE4991A, HP4285A HP4194A, 502BC HPE4991A
IMPEDANCE ANALYZER : DIGITAL MULITMETER : REFER TO STANDARD ELECTRICAL CHARACTERISTIC LIST
APPLIED THE CURRENT TO COILS, THE INDUCTANCE CHANGE SHALL BE LESS THAN 10% TO INITIAL VALUE & TEMPERATURE RISE SHALL NOT BE MORE THAN 20C 1. APPLIED THE ALLOWED DC CURRENT FOR
RATED CURRENT IDC
TEMPERATURE RISE TEST
20C MAX
10 MINUTES 2. TEMPERATURE MEASURE BY DIGITAL SURFACE THERMOMETER
AFTER TEST, INDUCTORS OVER LOAD TEST SHALL BE NO EVIDENCE OF ELECTRICAL AND MECHANICAL DAMAGE AFTER TEST, INDUCTORS WITHSTANDING VOLTAGE TEST SHALL BE NO EVIDENCE OF ELECTRICAL AND MECHANICAL DAMAGE INSULATION RESISTANCE TEST 1000 MOHM MIN.
APPLIED 2 TIMES OF RATED ALLOWED DC CURRENT TO INDUCTOR FOR A PERIOD OF 5 MINUTES
AC VOLTAGE OF 1000VAC APPLIED BETWEEN INDUCTORS TERMINAL AND CASE FOR 5 MINUTES
100 VDC APPLIED BETWEEN INDUCTOR TERMINAL AND COATING
MECHANICAL PERFORMANCE TEST 1. INDUCTORS SHALL BE VIBRATION TEST ( LOW FREQUENCY ) NO EVIDENCE OF ELECTRICAL AND MECHANICAL DAMAGE 2. INDUCTANCE SHALL SHOCK TEST NOT CHANGE MORE THAN 5% RESISTANCE TO SOLDERING HEAT 3. Q SHALL NOT CHANGE MORE THAN 20% INDUCTORS SHALL BE DROPPED 10 TIMES FROM A HEIGHT OF 1m ONTO 3cm WOODEN BOARD 1. AMPLITUDE :1.5 m/m 2. FFREQUENCY :10 -- 55 -- 10 HZ / 1MIN 3. DIRECTION :X, Y, Z 4. DURATION :2 HRS / X, Y, Z
TEMP :2605C TIME :101.0 SEC
NOTE : Specifications subject to change without notice. Please check our website for latest information.
26.02.2009
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 5
MOLDED WIREWOUND CHIP INDUCTORS
9. RELIABILTY TEST :
TERMINAL STRENGTH-PULL TEST TERMINAL SHALL NOT BE LOOSENED OR RUPTURED THE TERMINAL SHALL SOLDERABILITY TEST BE AT LEAST 90% COVERED WITH SOLDER THERE SHALL BE NO CASE DEFORMATION RESISTANCE TO SOLVENT TEST CHANGE IN APPEARANCE OR OBLITERATION OF MARKING CLIMATIC TEST TEMPERATURE CHARACTERISTIC 1. INDUCTORS SHALL BE NO EVIDENCE OF ELECTRICAL AND HUMIDITY TEST MECHANICAL DAMAGE 2. INDUCTANCE SHALL COLD TEST NOT CHANGE MORE THAN 10% 3. Q SHALL NOT CHANGE MORE THAN THERMAL SHOCK TEST 20%
HWI453232 SERIES
A 0.5KG LOAD SHALL BE APPLIED TO BOTH TERMINALS IN THE AXIS DIRECTION FOR 1 MINUTE. AFTER FLUXING, INDUCTOR SHALL BE DIPPED IN A MELTED SOLDER BATH AT 2405C FOR 5 SECONDS.
MIL-STD-202F, METHOD 215D
-40C ----- +125C 1. TEMP :402C 2. R.H. :90 ----- 95% 3. TIME :962 HOURS 1. TEMP :-252C 2. TIME :962 HOURS ROOM TEMP 15 MINS ROOM TEMP 15 MINS TOTAL :5 CYCLES -402C 30 MINS +1252C 30 MINS
DRY HEAT TEST
1. TEMP :852C 2. TIME :962 HOURS 1. TEMP :852C 2. TIME :100012 HOURS THERE SHALL BE NO EVIDENCE OF SHORT OR OPEN CIRCUITING 3. LOAD :ALLOWED DC CURRENT 1. TEMP :402C 2. R.H. :90 ----- 95% 3. TIME :100012 HOURS 4. LOAD :ALLOWED DC CURRENT
HIGH TEMPERATURE LOAD LIFE TEST
HUMIDITY LOAD LIFE
Note : Unless otherwise specified, allow the specimen to stand at room temperature for 1 hour or more but more than 2 hours, measure the electrical and mechanical performances
NOTE : Specifications subject to change without notice. Please check our website for latest information.
26.02.2009
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 6

▲Up To Search▲

Price & Availability of HWI453232-100

	To Download HWI453232-100 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .